AT&T 8434 - Manual (Page 11)

Issue 1 March 1996 11
To access the bridged appearance to answer a call, make a call, or bridge on to
an existing call, do the following:
1. Go off-hook.
■ You hear a dial tone.
2. Press the bridged call appearance button.
■ You hear a dial tone from the bridged call appearance, are con-
nected to an incoming call, or are bridged onto an existing call.
Call Forwarding 0
There are two Call Forwarding features you can use: Call Forwarding - All Calls
and Call Forwarding - Busy/Don’t Answer. Call Forwarding - All Calls causes
calls to your voice terminal to be forwarded immediately to a different telephone
number. Call Forwarding - Busy/Don’t Answer causes calls to your voice
terminal to be forwarded to a different telephone number only if you do not
answer or if your line is busy.
!
SECURITY ALERT:
Call Forwarding - All Calls and Call Forwarding - Busy/Don’t Answer are not
recommended for use to extend calls to “out of hotel” sites due to the potential
for toll fraud. Reliable call disconnect from your local service provider's central
switching office may not always be possible, thus, allowing dial tone to be
returned to the caller and toll fraud to occur.
To forward calls to another telephone number, do the following:
1. Go off-hook.
■ You hear a dial tone.
2. Do one of the following:
a. Press , and then press CFwrd .
b. Press .
Menu
Call Fwd