AT&T 8434 - Manual (Page 15)

Issue 1 March 1996 15
2. Do one of the following:
a. Press , and then press CPkUp .
b. Press .
c. Dial the Call Pickup feature access code _____.
■ You are connected to the incoming call.
To pick up a call when you are already active on another call, do the following:
1. Press .
■ The current call is placed on hold, and the green status lamp at
the call appearance flutters.
2. Do one of the following:
a. Press , and then press CPkUp .
b. Press .
c. Dial the Call Pickup feature access code _____.
■ You are connected to the incoming call.
Conference 0
The Conference feature allows you to set up a six-party conference call without
attendant assistance. You cannot create a conference call when the first party is
the attendant.
To establish conference call while on a two-party call, do the following:
1. Press .
■ The existing call is put on hold and you hear a dial tone.
Menu
Call Pickup
Hold
Menu
Call Pickup
Conf