LevelOne GEP-0950 - Manual (Page 41)

4-1. Web Management Home Overview
After login, System Information would be displayed as below. This page lists
default values and shows you the basic information of the switch, including “Switch
Status”, “TP Port Status”, “Fiber Port Status”, “Aggregation”, “VLAN”, “Mirror”,
“SNMP”, and “Maximum Packet Length”. With this information, you will know the
software version, MAC address, ports available and so on. It would be helpful while
malfunction occurred. For more details, please refer to Section 4-4-1.
• 4-1-1. The Information of Page Layout
 On the top part of the information page, it shows the front panel of the switch.
Linked ports will be displayed in green color, and linked-off ones will be in black.
For the optional modules, the slots with no module will only show covered plates,
the other slots with installed modules would present modules. The images of
modules would depend on the ones you insert. Vice versa, if ports are
disconnected, they will show just in black.
 On the left side, the main menu tree for web is listed in the page. According to
the function name in boldface, all functions can be divided into three parts,
including “Configuration”, “Monitoring” and “Maintenance”. The functions of each
folder are described in its corresponded section respectively. As to the function
names in normal type are the sub-functions. When clicking it, the function is
performed.