LevelOne GEP-0950 - Manual (Page 80)

74
4-3-4. Ping Status
Function name:
Ping Status
Function description:
To set up target IP address for ping function and display ping status.
Parameter description:
Ping Parameters:
Target IP address:
Set up a Target IP address to ping.
Count:
Use drop-down menu to set number of echo requests to send.
Four type of number can choose, there are 1, 5, 10 and 20.
Default: 1
Time Out (in secs):
Use drop-down menu to set number of echo requests time out in
second. Four type numbers can choose, there are 1,5,10 and 20.
Default: 1
NOTE: All the functions should press <Apply> button to start up
after you set up the parameters.
Ping Results:
Target IP address:
Show the active target IP address.