LevelOne GES-2450 - Manual (Page 73)

Web Smart Switch
73
The following table describes the labels in this screen.
LABEL DESCRIPTION
802.1 p Select the 802.1p value to mapping to the priority and drop precedence.
The 802.1p range is 0 to 7.
Priority Select the IEEE 802.1p priority you want to assign to the packets coming
into the switch on the ports specified in the port field. The priority range is
0 to 7.
Apply Click Apply to save your changes to the switch.
802.1 p This field displays the 802.1p priority level which you’ve choosed..
Priority This field indicates what IEEE 802.1p priority is assigned to the incoming
packets from the port.
3.6.3 DSCP - based Priority
You can configure the switch to assign an IEEE 802.1p priority to packets coming into the switch
with DSCPs assigned to them.
Click QoS > DSCP-based Priority to display the screen as shown next.