LevelOne GES-2450 - Manual (Page 85)

Web Smart Switch
85
logins.
 Debug - to record events which can be helpful for engineering
debugging of the switch’s function. This field is not recommended
to track as it creates many messages not helpful to typical users.
 Notice- to record the error which need to be noticed.
Apply Click Apply to save your changes to the switch.
Status It displays the status of local log settings.
Target It displays the target you’ve choosed.
Severity It displays the severity status.
Action
Click enable to enable this function.
Click disable to disable this function.
3.8.3.2 Remote Log
Click Diagnostics > Log Setting > Remote Log to view the screen as shown next.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Server Index
Select the index of remote log server. System supports 4 remote log
servers. When a server is set and enabled, log messages will send to this
server.
Server IP The IP address of remote log server.
Server Port Enter a number between 1 and 65535 as the server port.
Severity
Select the severity level(s) of the log entries you want to display. The
possible severity levels are: