LevelOne GES-2450 - Manual (Page 92)

Web Smart Switch
92
The following table describes the labels in this screen.
LABEL DESCRIPTION
User name Enter your user name for new account.
Password Type Select password type for new account:
 Clear Text: Password without encryption.
 Encrypted: Password with encryption.
 No Password: No password for new account.
Password If the password type is not “No Password”, the password must be
specified.
Retype Password Retype password to make sure the password is exactly you typed before
in “Password” field.
Privilege Type Select privilege level for new account:
 Admin: Allow to change switch settings.
 User: See switch settings only. Not allow to change it.
Apply Click Apply to save your changes to the switch.
Modify Click Delete to modify any configuration.
3.9.5 Enable Password
This page allow user to modify the enable password. In command line interface, user can use
“enable” command to change their privilege level to “Admin”. After “enable” command is issued,
user need to type the enable password to change their privilege level.
Click Maintenance > Enable Password in the navigation panel to display the screen as shown
below.
Note: It is highly recommended that you change the default password.