Specifications – Staub Electronics EA-AMP-12D-45A EPISODE - 12 CHANNEL 45 WATTS DIGITAL AMPLIFIER User Manual
Page 17
EA-AMP-12D-45A Installation Manual
Pg. 17
www.snapav.com Support: 866.838.5052
7. Specifications
Continuous Power Output
(All Channels)
45 watts RMS at 4 ohms
30 watts RMS at 8 ohms
Bridged Power Output
(All Channels)
90 Watts per channel RMS at 8 ohms
Note: Maintain 8 ohm minimum when using bridge mode
Input Sensitivity
500mV
Input Impedance
20,000 ohms
AUTO ON (Audio Sense)
Sensitivity
2.5mV
12 Volt Trigger Input
12V DC; 10K Ohms
12 Volt Trigger Output
12V DC; 10mA
S/N ratio
95 dB
Frequency Response
20 Hz to 20 kHz
Distortion (Un-bridged)
0.1% THD 20 Hz-20 kHz
Distortion (Bridged)
0.1% THD 20 Hz-20 kHz
Input Voltage
115V AC/230V AC
Fuse
115V AC
T8AL 250V
230V AC
T4AL 250V
Dimensions (Inches)
17”W x 2.3”H x 11”D
Weight
9.4 lbs.
Certification
Meets FCC Part 15, ETL Listed and tested under UL/EN60065