Device layout – Staub Electronics EA-AMP-12D-45A EPISODE - 12 CHANNEL 45 WATTS DIGITAL AMPLIFIER User Manual

Page 7

Advertising
background image

EA-AMP-12D-45A Installation Manual

Pg. 7

www.snapav.com Support: 866.838.5052

4. Device Layout

Use this section to become familiar with the connections, controls and features of the EA-AMP-12D-45A amplifier.

Refer to the page numbers in parentheses for more information on items regarding setup and operation.

4.1. Front Panel

4.2. Bottom

1. Power
Toggle power between On and Standby when the amplifier is in the “On” power mode.

1. Power
Change the transformer setting to allow for 115V or 230V AC operation.

Note: The EA-AMP-12D-45A includes an IEC cable meant for use with a NEMA 5-15 receptacle supplying 115V AC power. For
countries utilizing 230V AC power, the cable can be swapped to the correct cable for that region. When using the 230V AC input
voltage setting, change the fuse in the amplifier from the included T8AL 250V to a T4AL 250V fuse (See item 12, page 8 for fuse holder
location). Using the wrong fuse could result in blown fuses or damage to the amplifier, which is not covered by the warranty.

2. Channel Indicators
Indicates status of each channel based on the color of the LED.

1

2

Color

State

Blue

Power On, Normal Operation

Red

Standby

Color

State

Blue

Channel is functioning correctly.

Red

Channel is in Protection Mode

1

Advertising