Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 17)

17
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
4.2 LOGIN / LOGOUT
There are three password levels in the system; Administrator (highest), Supervisor, and Operator (lowest). If the
user does not login to the system, the user will be treated as a Guest and can only view live video display.
The system allows up to 18 user accounts. The Administrator can set up the login name and password for each
user (please refer to Section 6.7 for Password Setup) and has access to all features. The Supervisor can operate
the live video display, video playback and archive. The Operator can only operate the live video display.
To login or logout of the system, press
the MENU button on the front panel
of the DVR or the remote control and
then use the arrow buttons to select the
desired option. Once the option is highlighted,
press the ENTER button. Alternatively use the
mouse by first right-clicking the mouse to display
the main MENU and then select the LOGIN icon.
In Login/Logout menu, follow the text input method described in Section 4.1 to enter the Login name and
Password. Once the name and password are entered, press ▲▼ to highlight and select the Login option.
Press ENTER to login the system. To logout of the system first display the Login/Logout menu and the press ▲▼
to highlight and select Logout option, and then press ENTER. Use the ESC button on the front of the DVR or the
remote control to exit without making changes. Alternatively use the mouse to select the exit button or simply
“right-click.”
THE FACTORY PRESET ADMINISTRATOR LEVEL LOGIN NAME IS user, THE PASSWORD IS 1234
4.3 BASIC OPERATIONS USING THE CONTROL BAR
After logging into the system, use the supplied mouse to operate the DVR. A Control Bar will be displayed at
the bottom of the display by “dragging” the mouse to the bottom screen. It is recommended to operate the
Control Bar using the included mouse. Where applicable, buttons on the front panel of the DVR or remote
control are indicated in the descriptions below.
The following is a brief description for each item in the menu and its specific operations:
• NUMERIC
Select any camera from the front panel of the DVR or remote control by using the numeric buttons. Only
buttons 1-8 are available in this 8 channel DVR. Alternatively use the mouse to select any of these icons to
switch to the full-window display of a particular camera.