Steelcraft Automotive 72250 BULL BAR - Manual (Page 4)

BULL BAR
09-13 DODGE RAM 1500
Page 4 of 5 6/6/13 Rev4(DP)
Driver Side Installation Pictured
Hold the splash guard up to the brackets
and mark location for cutting to clear
brackets. Cut only what is needed to
insert bracket through the splash guard.
(2) 12mm x 35mm Hex Bolts
(4) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
(Fig 6) Driver side Support Bracket in
"with Tow Hook" position
Front
12mm x 35mm Hex Bolt
(2) 12mm Flat Washers
12mm Lock Washers
12mm Hex Nuts
(also bolts the Bull Bar to the Mounting Bracket)
(Fig 5) Driver side mounting location pictured from
behind bumper on tow hook equipped model
Front
Remove the (2) factory
hex nuts from tow hook
Installation pictured without the
splash guard for illustration
Front
Front
Fig 7
Fig 8