Acer Altos G520 series - Manual (Page 34)

2 System setup 24
Connecting peripherals
The system unit, keyboard, mouse, and monitor constitute the basic
system. Before connecting any other peripherals, connect these basic
peripherals first to test if the system is running properly.
Note: Unless otherwise indicated, all illustrations shown in this
section show the Altos G520 server chassis.
To connect the PS/2 keyboard
Plug the keyboard cable into the PS/2 keyboard port (purple
port) located on the rear panel of the server.
BB!H631!.!FO/cppl!!Qbhf!35!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN