Superwinch LT3000 ATV – 1,360 kgs/12V - Manual (Page 4)

Figure 7 – Socket
Assembly mounts
from outside/in
Clutch must be fully
engaged before
winching. Never engage clutch knob
while drum is turning.
INTERMITTENT DUTY
An electric winch is like any other
motor driven power tool such as an
electric drill or saw. The electric mo-
torshould not be allowed to become
excessively hot. Normal precautions
will extend the life of your motor.
Keep the durations of pulls as short
as possible.
CAUTION !
If the winch motor
stalls, do not
continue to apply power.
CAUTION !
Engaged
Disengaged
(Freespool)
Figure 10
WINCH
BATTERY
Yellow – 6 ga.
1
2
Blue – 6 ga.
Black – 6 ga.
Red – 6 ga.
to solenoid
to circuit breaker
CIRCUIT
BREAKER
"+" SOLENOID
Green
Black Green
Red
Red
Black
optional
optional remote
control
ATV wiring
connection
ATV main
switch
Fuse
Brown/Blue
ATV MASTER WIRINGS
Figure 6
9
Figure 8
If the end of the motor becomes
uncomfortably hot to touch, stop
winching and allow the motor to
cool down.
For further information and com-
plete warranty, visit our website.
www.superwinch.com
REPLACEMENT PARTS LIST
Reference No. Description Part Number
1 Wire Rope Assy. 1511F
2 Motor Assy. 87-12890
3 Drum Assy. 87-12891
4 Gearbox Assy. 87-12892
5 Solenoid Assy. 87-12893
6 Handlebar Rocker Switch 87-12894
7 Hand Held Remote 87-12895
8 Circuit Breaker Assy. 87-22873-16
9 Clevis Hook Assy. 87-42615
REMOTE SOCKET MOUNTING
1. Detemine the mounting location for the remote socket.
2. Drill three holes using the included dimensions as a guide.
3. Once the remote socket is mounted, route the jacketed
green and black leads back to where the solenoid is
mounted. Splice the red lead to a key controlled
electrical wire on the ATV.
1.95”
49.5mm
.18”
4.6mm
.98”
24.8mm
Ш.86”
Ш 21.8mm
2
1
Red
Black- 6 ga.
Black Black
Blue
Black
Green
1
2
3
4
5
6
7
8
9
6 7