Setting up the gp-ib, B) setting up the gp-ib – Teledyne LeCroy WS-GPIB User Manual

Page 8

Advertising
background image

(b) Setting up the GP-IB

Set up the GP-IB on the measurement screen of the WaveSurfer (Figure
2) following the steps shown below.

c Touch [Utilities] in the menu bar and select [Utilities Setup] from the

pull-down menu.

d Click the Remote tab in the setup area in the lower part of the screen.

e Select the GpibAddress and set an address by entering a value.

Figure 2 Measurement Screen of the WaveSurfer

c

d

e

Advertising
See also other documents in the category Teledyne LeCroy Equipment: