Teledyne LeCroy HFP1000 - Manual (Page 15)

Operator’s Manual
922251-00 Rev A 9
Accessory Descriptions
The following Tip and Clip accessories can be pushed into the
probe tip socket, ground socket or any other socketed lead or
adapter.
Tips
S TRAIGHT T IP
The straight tip is rugged and designed for general probing. Fits
in either probe socket.
PACC-PT001, package of 4.
S HARP T IP
Rugged, titanium tip designed to connect to the smallest vias and
small test points. Fits in either probe socket.
PACC-PT002, package of 4.
IC L EAD T IP
Covered in insulation on all sides (except for a small edge), this
tip was designed to prevent shorting neighboring IC leads. The
gold part of the tip is not insulated and should touch the IC lead
to be tested. It is one-size-fits- all and will work with any IC lead
pitch. Fits in either probe socket.
The IC Lead Tip is an optional accessory for the HFP1000.
PACC-PT003, package of 4.