Teledyne LeCroy HFP1500 - Manual (Page 10)

HFP1500 High Frequency Probe
4 922252-00 Rev A
Soft Accessory Case 1
Instruction Manual 1
Certificate of Calibration 1
Optional Accessories
The following items are available as optional accessories for the HFP1500 probe:
Micro Clip
High Frequency Cartridge
For part number information for standard and optional accessories refer to page 18, Replaceable
Parts List.
Specifications
Nominal Characteristics
Nominal characteristics describe parameters and attributes that are guaranteed by design, but do
not have associated tolerances.
Input Dynamic Range ±8 V
Offset Range ±12 V 1
Maximum Input Voltage
1
40 V pk
Attenuation ÷10
Output Connector ProBus
Interface ProBus
Oscilloscope Full Compatibility Teledyne LeCroy WaveRunner and WavePro
oscilloscopes, and LC series oscilloscopes with
firmware version 8.7.0 or higher.
1
Subject to input voltage vs. frequency derating. See Figure 1.