Teledyne LeCroy HFP1500 - Manual (Page 18)

HFP1500 High Frequency Probe
12 922252-00 Rev A
Probe Holder
The FreeHand Probe Holder lets you focus on the oscilloscope
screen instead of on maintaining contact to multiple test
points. It allows the user to concentrate on what is really
important – the waveform.
It is designed to keep most of the weight on the probe tip and
will prevent lost contact when a bump to the table shakes the
circuit under test.
Additionally, the HFP probe can be mounted horizontally or
vertically in the FreeHand, giving added measurement
flexibility.
PACC-MS001, package of 1.
To use the FreeHand probe holder
1. Slide the probe cable through the slot on the bottom of
the translucent holder section.
2. Slide probe backwards in the probe holder.