Teledyne LeCroy Merlin II - Users Manual User Manual
Page 179
169
Merlin II Protocol Analyzer User’s Manual
CATC
SW Version 2.50
Step 3
If you intend to connect the RS232 cable directly to a serial
port on your PC, do so now. You are now done.
If you are planning to link the probe to your PC via a USB
connection, perform the remaining steps.
Step 4
Attach ’COM A’ in the RS-232 Cable [b] to ‘Connector A’
on [d], the RS232 to USB converter.
Step 5
Connect the connector marked with ‘COM B’ in the RS-232
Cable [b] to ‘Connector B’ in the RS232 to USB converter [d].
Step 6
Connect the USB cable to the RS232 to USB converter [e].
Step 7
Connect the other end of the USB cable to your PC.
Monitoring RS232 level Signals
Legend for photo:
[a] HCI Probe Cable
[b] HCI Trace RS-232 Cable
[c] Connectors A and B on the other end of the HCI Trace RS-232
Cable
[d] Two-Port RS-232 to USB Converter