Teledyne LeCroy Merlin II - Users Manual - Manual (Page 23)

13
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
2.6 Your First Bluetooth Recording
After installing and launching the software, you can test Merlin II by
creating an inquiry recording. In this test, Merlin II will issue a General
Inquiry that asks local devices to identify themselves. Merlin II then records
the responses.
Inquiry Recording
To create an inquiry recording, perform the following steps:
Step 1 Click the down-arrow on the right side of the
Record:Piconet button on the toolbar
.
A sub-menu appears with options for Piconet Recording Mode, and Inquiry
Recording Mode.
Step 2 Select Inquiry Recording Mode.
The button changes appearance and shows the label Record: Inquiry
Step 3 From the menu, select Setup > Recording Options.
The Recording Options dialog opens with the Inquiry page displaying.
Step 4 If desired, make any changes to the options, then click OK.
Step 5 Click the button (i.e. not the down-arrow.)