Teledyne LeCroy USB Analyzer Automation Manual - Manual (Page 59)

Teledyne LeCroy Automation API Reference Manual for USBTracer, USB Advisor, and Voyager USB Protocol
Suite
59
3.1.12 ITrace::AnalyzerErrors
HRESULT AnalyzerErrors (
[in] long error_type,
[out, retval] IAnalyzerErrors** analyzer_errors );
Retrieves trace file errors.
Parameters
long error_type Type of error collection you want to retrieve; the following values
are valid:
0x00000001 - Pid Error
0x00000002 - CRC5 Error
0x00000004 - CRC16 Error
0x00000008 - Packet Length Error
0x00000010 - Stuff Bit Error
0x00000020 – EOP Error
0x00000040 – Babble Start Error
0x00000080 – Babble End Error (LOA)
0x00000100 – Frame Length Error
0x00000200 – Handshake Timeout Error
0x00000400 – Analyzer Internal Error
0x00000800 – Data Toggle Error
0x00001000 – Microframe Error
0x00002000 – Short Byte Error (bits missing)
analyzer_errors Address of a pointer to the AnalyzerErrors object primary
interface
Return values
ANALYZERCOMERROR_INVALIDERROR Invalid error type specified
Remarks
AnalyzerErrors object is created via this method call, if call was successful.