Teledyne LeCroy QPHY-PCIe3-Tx-Rx - Manual (Page 6)

2 923662 Rev B
Required Host Computer System
Usually, the oscilloscope is the host computer for the QualiPHY software, and all models that
meet the acquisition requirements will also meet the host system requirements. However, if you
wish to run the QualiPHY software from a remote computer, these minimum requirements apply:

Operating System:
o Windows 2000 Professional with service pack 4
o Windows XP Professional with service pack 2
o Windows VISTA with service pack 1
o Windows 7 Professional

1 GHz or faster processor

1 GB (32-bit) or 2 GB (64-bit) of RAM

Ethernet (LAN)

network capability

Hard Drive:
o At least 100 MB free to install the framework application
o Up to 1GB per standard installed to store the log database (each database grows
from a few MB to a maximum of 1 GB)
See Set Up Remote Control for configuration instructions.