Teledyne LeCroy QPHY-BroadR-Reach - Manual (Page 17)

QPHY-BroadR-Reach Software Option
Due to the variety of different potential connectors on the UTP cable, the operator may choose to create a
SMA Breakout fixture which will mate with their connector.
Figure 10 - Example of Custom SMA Breakout fixture
QPHY-BROADR-REACH TEST CONFIGURATIONS
Test configurations include variable settings, limit sets, and test selections. See the QPHY-BroadR-
Reach Variables section for a description of each variable value and its respective default value. See the
QPHY-BroadR-Reach Test Limits for more information about the default test limits.
Demo
This configuration will run all of tests using saved waveforms. However, the script will prompt the user as
if the script was using live waveforms but the operator shall just press OK to continue with the demo. This
configuration will pause after each test to give the operator a chance to review the results. This
configuration will not save waveforms used during the test.
Run Live with pauses, single ended inputs on Row A
This configuration will acquire live data using single ended inputs and will pause after each test. The
waveforms will be saved to the directory defined in the SaveWaveformPath variable.
922533 Rev B 17