Teledyne LeCroy QPHY-BroadR-Reach - Manual (Page 6)

USING QUALIPHY BROADR-REACH
QualiPHY BroadR-Reach guides the user, step-by-step, through each of the tests described in the
BroadR-Reach specification: BroadR-Reach Physical Layer Transceiver Specification For Automotive
Applications, v.2.0. To do this, the user must set up a test session.
Before beginning testing, users choose the test configuration they wish to run. There are two pre-loaded
test configurations. They are:
• Demo
• Run Live with pauses, single ended inputs on row A
These pre-loaded configurations provide quick and easy ways to begin compliance testing (see the
QPHY-BroadR-Reach Test Configurations section for details on each configuration). If the user does
not want to run any of these configurations, they can create their own custom configuration (see the
Creating Custom Configurations section for details).
The pre-loaded configurations are set up to run all of the tests required for compliance. If this is not what
the user wants, the variables can be modified (see the QPHY-BroadR-Reach Variables section of this
manual).
The variables are pre-loaded with the standard settings for compliance testing; however, the user may
choose to create their own configuration with the variables set as desired.
6 922533 Rev B