Teledyne LeCroy QPHY-SATA - Manual (Page 13)

QPHY-SATA Software Option
915745 Rev G
13
Customizing QualiPHY
QualiPHY must be configured before running tests for the first time. There are many possible test configurations.
It is easy to create and save configurations
1. Click the Configuration button in the QualiPHY main menu and select the “Empty Template” from the
pop-up menu.
2. Click the Edit/View Configuration button in the QualiPHY main menu:
3. Set the controls as appropriate for the product under test and the instruments being used. Selecting the
Tests checkboxes will enable the required tests for each category at the selected speed. The Calibration
group is for receiver test calibrations and should be run prior to or at the same time as the RSG tests.
Figure 5. QualiPHY Setup menu