Teledyne LeCroy WaveStation 3000 Operators Manual - Manual (Page 18)

WaveStation 3000 Function and Arbitrary Waveform Generator
Generating Basic Waveforms
Follow this procedure to generate one of the five basic waveform types.
1. Choose your output channel by pressing the Ch1/Ch2function button until the correct tab is active on the
display.
NOTE: WaveStation defaults to the Channel 1 tab and Waveform menu whenever you power on, although
you can
change this setting on the Utility menu. If Channel 1 is correct, skip to Step 2.
2. Press the Waveform function button to open the Waveform menu, then select the desired shape using the
softkey.The options are: Sine, Square, Ramp, Pulse, and Noise.
NOTE: The default and min/max settings for each waveform depend on your WaveStation model. See the
specifications maintained on the product datasheet at teledynelecroy.com.
You should see your waveform selection appear on the active Channel tab, along with the parameter
option menu and Parameter Value list.
12 922869 Rev B