Teledyne LeCroy WaveStation 3000 Operators Manual - Manual (Page 9)

Operator's Manual
Front Panel
A. USB A Connector enables you to attach a storage drive.
B. Power Button turns on/off the WaveStation.
C. LCD Display shows an annotated waveform shape, the Parameter Value List, and the various option
menus.
D. Softkey Buttons enable you to select the corresponding option from the changing menus.
E. Numeric Keypad allows you to adjust parameter values and change units.
F. Function Buttons open corresponding option menus. The top, three Signal Conditioning buttons apply
Modulation, Sweep, or Burst to the active waveform. Parameter, Utility, and Help open their respective
menus.
G. Waveform Button opens the menu of waveform shapes.
H. Ch1/Ch2 Button selects the output channel and activates the corresponding tab on the display.
I. Adjustment Knob and Left/Right Cursor Buttonshelp with making selections and modifying values.
J. Output Buttons control the activation/deactivation of corresponding BNC Channel Outputs.
922869 Rev B 3