TREND IQ3 User Guide - Manual (Page 35)

IQ3 Web User Guide TC200631 Issue 2, 02/02/2009 35
Using IQ3 from a Web browser
View the 4.9 alarm log
The alarm log contains the source module reference (e.g. S1 for sensor 1), its label, the type of alarm (e.g. high), the
value at the time of alarm, the time (time and date) the alarm occurred, the reported state (occurred or cleared), and
the current state of the alarm message (whether it is active or completed).
to view the alarm log:
Connect to the IQ3 controller as described in the ‘ 1. Connect to the iQ3 Controller ’ section of this manual.
If you have a user name and password for the controller you should click 2. login to login now to ensure the
controller presents you with information that is relevant to you as described in the ‘ login ’ section of this
manual. This may cause the controller to display a different page.
Click 3. Alarms. The display shown below will be displayed.