Vanguard TTRA-S2 (ATRT-03 S2, ATRT-03A S2, ATRT-03B S2, Tri-Phase) User Manual
Page 33
REV 2 TTRA-S2 VERSION 1.x SOFTWARE MANUAL
30
5.6
Exporting Test Plans to a USB Thumb (Flash) Drive
You can export test plans to a USB thumb (Flash) drive for later use with an ATRT in stand-alone
mode.
1. Make sure your USB thumb drive is inserted in a USB port on your PC. Click on the File or
Test-Plan menu and select Export to Thumb Drive. The following window will be
displayed:
2. If the test plan you would like to export is not in the current directory, click on the
“Path” button at the top of the window and browse to the directory containing the file.
Once you have located the test plan to be exported, click on the filename. You may
select additional test plans by holding down the [CTRL] key and clicking on each
subsequent filename. Once you have selected the test plan(s) to be exported, click on
the “OK” button. The following window will be displayed: