Vanguard CVT-765 User Manual
Page 19
REV 1 CVT-765 USER’S MANUAL
16
1. YES
Press the
[1]
key (YES) if you would like to enter the transformer name plate
voltage values. The following screen will be displayed.
Type the H winding name plate voltage value using the numeric keypad. The
screen will be updated as shown below:
Press the
[ENTER]
key. The screen will be updated as shown below:
Type the X winding name plate voltage value using the numeric keypad. The
screen will be updated as shown below:
Press the
[ENTER]
key. Continue to step c.
2. NO
Press the
[2]
key (NO) if you do not want to enter the transformer name plate
voltage values. Continue to step c.
NAME PLATE VOLTAGE:
H : X
2,400 : 240
NAME PLATE VOLTAGE:
H : X
2,400 : 0
NAME PLATE VOLTAGE:
H : X
2,400 :
NAME PLATE VOLTAGE:
H : X
0 :