Vanguard CVT-765 - Manual (Page 40)

CVT-765 USER’S MANUAL REV 1
37
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the CVT-765’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the [1] key (ERASE INTERNAL REC).
The following screen will be displayed:
Continue with the steps below.
1. ERASE SINGLE REC.
Press the [1] key (ERASE SINGLE REC.) to erase a single test record from the unit’s
internal Flash EEPROM. The following screen will be displayed:
NOTE
You can cancel the process and return to the “START-UP” menu by pressing
the
[STOP] key.
ERASE RECORD
NUMBER:
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT
1.ERASE INTERNAL REC
2.ERASE THUMB DRV REC
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT