Vanguard CVT-765 - Manual (Page 23)

REV 1 CVT-765 USER’S MANUAL
20
3.6 Working With Test Records
3.6.1. Viewing the Contents of the Working Memory
Whenever a test is performed or a test record is retrieved, the data is stored in the CVT-765’s
working memory. You can view the test data using the steps below:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [3] key (DISPLAY RECORD).
c. The basic test record information will be displayed as shown:
d. Press the [Contrast ∨] key. The test record details will be displayed as shown below:
Press the
[STOP]
key to return to the “START-UP” menu.
1 SINGLE PHASE
7440 volts
RATIO %DIFF
10.004 0.04
SINGLE PHASE
Num Tests: 1
04/15/11 09:52:50
1. RECORD ID
2. SET 50/60 HZ
3. DISPLAY RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. set language
1. TEST TRANSFORMER
2. SETUP
TIME: 15:16:17
DATE: 05/17/11