Vanguard CT-3500 S2 User Manual
Page 16
CT-3500 S2 USER’S MANUAL
REV 1
12
3.5 Testing
Procedures
3.5.1. Entering Test Record Header Information
You can enter the test record header information before performing tests. The record header
includes identifying information such as the company, station, circuit, manufacturer, etc. Once
the header information has been set, it will apply to all subsequent test records. Follow the
steps below to enter the test header information:
a. Start from the “START-UP” menu:
Press the
[3]
key (SETUP).
b. The following screen will be displayed:
Press the
[1]
key (SHOT DESCRIPTION).
c. The following screen will be displayed:
Type the company name using the keypad. Press the
[ENTER]
key when you are done
typing the company name.
COMPANY:
_
↑
/
↓
TO POSITION
"ENTER" TO ACCEPT
1. SHOT DESCRIPTION
2. SAVE / RESTORE
3. SET 50/60 HZ
4. SET DATE & TIME
1. TIME BRKR 05/14/12
2. GET RSLT 08:45:25
3. SETUP
4. DIAGNOSTICS