Vanguard CT-3500 S2 - Manual (Page 38)

CT-3500 S2 USER’S MANUAL REV 1
34
3.6.3. Restoring a Test Shot From Flash EEPROM
Use the steps below to restore a test record from the CT-3500 S2’s internal Flash EEPROM to
the working memory:
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (SAVE / RESTORE).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the unit.
Press the [2] key (RESTORE SHOT).
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. SHOT DESCRIPTION
2. SAVE / RESTORE
3. SET 50/60 HZ
4. SET DATE & TIME
1. TIME BRKR 05/16/12
2. GET RSLT 09:55:55
3. SETUP
4. DIAGNOSTICS