Vanguard CT-3500 S2 - Manual (Page 39)

REV 1 CT-3500 S2 USER’S MANUAL
35
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the unit’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the
[1]
key (INTERNAL STORAGE).
The following screen will be displayed:
Continue with the steps below.
1. ENTER SHOT NUMBER
Press the
[1]
key (ENTER SHOT NUMBER) if you know the record number that
you would like to restore.
1.1. The following screen will be displayed:
Type the shot number using the keypad and then press the [ENTER] key.
RESTORE SHOT NUM:
RESTORE SHOT
1.ENTER SHOT NUMBER
2.SCROLL TO SELECT
1.INTERNAL STORAGE
2.THUMB DRIVE
RESTORE SHOT
1.ENTER SHOT NUMBER
2.SCROLL TO SELECT