Vanguard CT-7000 S2 - Manual (Page 55)

REV 2 CT-7000 S2 USER’S MANUAL
50
d. The following screen will be displayed:
Press the [1] key (INTERNAL TRIGGER).
e. The following screen will be displayed:
Press the [4] key (C-O).
f. The following screen will be displayed:
1. Contact #1 CLOSE
Press the [1] key if you would like the open operation to be initiated after contact
channel #1 is closed. Continue to step g.
2. Set DELAY
Press the [2] key to set a delay time between the CLOSE command and the OPEN
command. The following screen will be displayed:
Type the delay time using the numeric keypad and then press the
[ENTER]
key.
Continue to step g.
3. No DELAY
Press the [3] key to initiate the CLOSE and OPEN commands simultaneously.
Continue to step g.
C-O Delay in mS:
(10 – 500)
mSec
ENTER when done
C-O Second Trigger
1. Contact #1 CLOSE
2. Set DELAY
3. No DELAY
TIMING MODE:
1. OPEN 2. CLOSE
3. O-C 4. C-O
5. O-C-O
TRIGGER MODE:
1. INTERNAL TRIGGER
2. EXTERNAL TRIGGER