Vanguard EZCT-10 - Manual (Page 16)

EZCT VERSION 5.x SOFTWARE MANUAL REV 1
14
4. The “File Prefix” input field allows you to enter a word that will be used as part of the
filename for the stored record on the PC hard drive. When a test record is retrieved
from a CT Tester and stored on the hard drive, the filename is in the following format:
So if you would like the filename to be “sample-date-001.tst-ezct”, enter the word
sample in the “File Prefix” input field.
5. Click on the “Download Test” button. The following window will be displayed:
6. Browse to the folder where you would like the test record(s) to be saved and then click
on the “OK” button. The selected test record(s) will be retrieved from the CT Tester and
saved in the selected folder. The last test record that was retrieved will be displayed in
the EZCT software.
NOTE
If a test record file with the same name already exists at the storage
location, the following window will be displayed:
To cancel the retrieval process, click on the “Cancel” button.