Vanguard EZCT-10 - Manual (Page 18)

EZCT VERSION 5.x SOFTWARE MANUAL REV 1
16
4.2 Recalling a Test Record From the PC Hard Drive
Test records stored on the PC hard drive can be recalled using the steps below:
1. Click on the Recall-Test menu (or click on the File menu and select Recall Test). The
following window will be displayed:
• The “Shot Path:” section at the top of the window displays the name of the directory
where the test records are being retrieved from. If you wish to retrieve records from
a different directory, click on the “Shot Path” button and browse to the folder
containing the test records.
• You can click on a column heading to sort the test records based on the column
heading name (filename, date, number of tests, company, station, or circuit). An
arrow next to the heading name will indicate whether the list is sorted in ascending
or descending order. Click on the heading again to reverse the sort order.
2. Click on the filename you would like to retrieve and click on the “OK” button. The test
record will be loaded and the tabulated test results will be displayed (please see section
4.7 for details).