Vanguard EZCT-2000A - Manual (Page 40)

EZCT-2000A USER’S MANUAL REV 1
36
3.4.4. Printing a Directory of Test Records Stored in the EZCT-2000A’s Memory
You can print a directory of all the test records stored in the EZCT-2000A’s Flash EEPROM using
the steps below:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [3] key (RECORD DIRECTORY).
c. The following screen will be displayed:
NOTE
The above screen will be displayed only if a USB Flash drive is NOT connected
to the EZCT-2000A’s USB Flash drive port. If a USB Flash drive is connected,
the following screen will be displayed:
Press the [1] key (INTERNAL DIRECTORY). The following screen will be
displayed:
1. INTERNAL DIRECTORY
2. THUMB DRIVE DIR
PRINT DIRECTORY
1.
FULL DIRECTORY
2. SHORT DIRECTORY
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RES RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 02/16/10
2. SETUP 10:24:25
3. TEST PLANS
4. DIAGNOSTIC