Vanguard EZCT-2000A - Manual (Page 43)

REV 1 EZCT-2000A USER’S MANUAL
39
3.4.5. Printing a Directory of Test Records Stored in a USB Flash Drive
You can print a directory of all the test records in a USB Flash drive using the steps below:
a. Make sure the USB Flash drive is inserted in the EZCT-2000A’s USB Flash drive port
(“USB MEM” port). Then start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [3] key (RECORD DIRECTORY).
c. The following screen will be displayed:
Press the [2] key (THUMB DRIVE DIR).
d. The following screen will be displayed while the directory is printed:
When printing is finished, you will be returned to the “START-UP” menu. A sample
directory printout is shown in Figure 10.
PRINTING DIRECTORY
1. INTERNAL DIRECTORY
2. THUMB DRIVE DIR
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RES RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 02/16/10
2. SETUP 10:24:25
3. TEST PLANS
4. DIAGNOSTIC