Vanguard EZCT-2000A - Manual (Page 51)

REV 1 EZCT-2000A USER’S MANUAL
47
3.4.8. Erasing Test Records From a USB Flash Drive
You can erase individual or all test records stored in a USB Flash drive. To erase a test record:
a. Make sure the USB Flash drive is inserted in the EZCT-2000A’s USB Flash drive port
(“USB MEM” port). Then start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [5] key (ERASE RECORD).
c. The following screen will be displayed:
Press the [2] key (ERASE THUMB DRV REC).
1. ERASE INTERNAL REC
2. ERASE THUMB DRV REC
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RES RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 02/16/10
2. SETUP 10:24:25
3. TEST PLANS
4. DIAGNOSTIC