Vanguard VBT-80P - Manual (Page 17)

Operating Procedures VBT-80P

16
Table 4 Enter Test Record ID Procedure (continued)
STEP ACTION DISPLAY
4-8 Enter the utility MODEL name using the
alpha-numeric keypad. When finished,
press ENTER to store the data and go to the
“
SERI AL NUMBER: ” i nput s c r e e n.
4-9 Enter the utility SERIAL NUMBER using
the alpha-numeric keypad. When finished,
press ENTER to store the data and go to the
“
COMMENTS: ” i nput s c r e e n.
4-10 Enter test COMMENTS using the alpha-
numeric keypad. When finished, press
ENTER to store the data and go to the
“
OPERATOR: ” i nput s c r e e n.
4-11 Enter the test OPERATOR name, using the
alpha- numeric keypad When finished, press
ENTER to store the data and return to the
MAIN MENU display.
This completes the ENTER ID procedure.
NOTE
The VBT-80P will retain the test record ID in memory until it is changed by the operator.
OPERATOR:
UP/DOWN TO POSITION
“ENTER”
TO ACCEPT
1.RUN TEST 07/06/06
2.SETUP 16:27:00
SERIAL NUMBER:
UP/DOWN TO POSITION
“ENTER”
TO ACCEPT
KVA RATING:
UP/DOWN TO POSITION
“ENTER”
TO ACCEPT