Vestil SCALE-S User Manual
Page 25
25
to function menu. Adjust to C27. press
for confirm. And set
“C27 2” press
again.
2. Serial interface baud rate set: after set the C27. indicator show
C28. press
enter to C28 setting. Set the serial interface baud
rate the same with equipped printer. For example: the printer baud rate
is 9600 bt/s. set
“ C28 3”. Press
. Save the setting. Enter to
C29
3. Data bit and calibration bit set: the indictor show C29. Press
. Set the serial interface data bit and calibration bit the same
with equipped printer.
4. Print operation: after the above setting is finished. Press
. Then press the
back to the weighing. Press
.
The print result as bellows:
NO： XX
Gross： XXXX
Tare： XXXX
Net： XXXX
Date：XXXX.XXXX
Time：XX.XX.XX
PDF 文件使用 "pdfFactory" 试用版本创建