Vestil STOR-96 & 912 User Manual
Page 13
Advertising
STOR-96 and 912-G-W-1RH 0311
Copyright 2011 Vestil Mfg. Co.
Page 13 of 20
Place roof on top of the storage unit walls and simply pull it down into the channels until it bottoms out. Repeat
with second roof piece.
Roof
panel
Roof
panel
Install the formed roof angle piece (16) between the roof panels; then install the roof seam cover plate (15) on
top of the angle piece.
NOTE: Some shed kits will combine parts 15 & 16 into a single welded cover plate. Insert the projection on the
underside of the welded cover plate into the space between the roof panels.
Secure the roof seam cover plate to roof and walls with 4 self-tapping screws. (2 screws at each end of the cover
plate)
Advertising