WARN 2000 DC - Manual (Page 9)

PAGE 9 91728A0
Wiring Instructions - Continued
Warning
Shock & Fire Hazard
Failure to observe these instructions could lead to severe injury or death .
WARNING !
 Do not route electrical cables
across sharp edges.
To Prevent Serious Injury or
Read and follow all wiring
Death from Electrical Fire:

 Do not route electrical cables
through or near moving parts.
instructions included in
operators manual.
 Insulate and protect all exposed
wiring and electrical terminals.

Never route electrical cables across sharp edges

Never route electrical cables through or near moving parts.

Always read and follow all wiring instructions included in operators guide.

Always insulate and protect all exposed wiring and electrical terminals
 Install battery cables with red lead connected to the positive terminal of battery, and black lead to the
negative terminal of battery.
 Verify that all wiring connections are clean and tight.
Before using the winch, verify the following:
 Wiring to all components is correct.
 There are no exposed wiring or terminals, cover any existing exposures with insulator plate,
terminal boots, heat shrink tubing or electrician’s tape.