Warner Electric ARC Clutch_ZRC Top Load - Manual (Page 13)

Warner Electric • 800-825-9050 P-2019 • ARC/ZRC 13
Place top load in vice, clamping on flats. Using a
7/8” socket and breaker bar, torque the nut inside
top load assembly to 45 ft-lb (508 Ncm). See
Figure 59.
Figure 60
Apply blue loctite to spindle adapter. See Figure
60.
Figure 61
Apply Blue
Loctite
Continue to hold top-load in vice, clamping on
flats. Using YTL3-0005 and a soft hammer, tighten
spindle adapter (if applicable). See Figure 61.
Figure 62
Install lower spring cover(if applicable), spring, and
upper spring cover (if applicable) onto top-load
assembly. Thread lower spring adjustment ring onto
top-load assembly. See Figure 62.
Figure 63
Thread upper spring adjustment ring onto top-load
assembly using face spanner wrench (YTL2-0002) to
tighten. See Figure 63.
Figure 64
Tighten spring adjustment rings using two spanner
wrenches (YTL3-0009) and soft hammer. See Figure
64.
Figure 65