Warner Electric PCBC-1525_1225 - Manual (Page 18)

18 Warner Electric • 800-825-9050 P-214 • 819-0518
PCB-1525/1225 Clutch/Brake – Normal Duty
Shaft Size .937 – 3.000
Static Torque Clutch 700 lb. ft.
Static Torque Brake 465 lb. ft.
Maximum Speed 2,000 rpm
Standard Voltage D.C. 6, 24, 90
All dimensions are nominal unless otherwise noted.
* Mounting holes are within .010 of true position
relative to pilot diameter.
Customer Shall Maintain:
1. Concentricity of brake mounting pilot diameter
with mounting shaft within .010 T.I.R.
2. Squareness of brake magnet mounting face
with mounting shaft within .006 T.I.R.
measured at magnet mounting bolt circle.
4.625 Dia.
.593
1.750
.593
.562
Max.
.171
Max.
7.531
5.750
1.546
.921
5/16-18
UNC-3A
.093 When New
1.640
16.250
Max.
15.578
Dia.
8.500
Dia.
7.093
Dia.
3.250
3.187
3.000
7.140 Max.
.093 When New
Armature View
See page 28 for details
on Bushings.
See page 5 for details
on Drive Pin mount-
ings.
Magnet View
(Inside & Outside Mounted)
.358/.338 dia. (8)
holes equally spaced
on 13.000 dia.
Removable plug in
ends for 1/2" con-
duit.
.358/.338 dia. (6) holes
equally spaced on 7.250
dia.*
8.687
6.378/6.376
Pilot Dia.
3.750
13.875/13.871 Pilot Dia.