Waterstone BRIDGE FAUCETS 6350 - Manual (Page 2)

4”
RECOMMENDED HOLE SIZE 1-3/8”
SINK OR MOUNTING SURFACE
4”
8”
1.
FAUCET HOLE PLACEMENT
NOT TO SCALE Recommended deck hole 1-3/8”. Drill holes for bridge faucet in mounting surface 8” on center.
OPTIONAL SIDE SPRAY: We recommend installing the side spray hole a minimum of 4-3/4” away
from nearest mounting hole of faucet.
1 2 3 4
Turn off water supply. Observe all local
plumbing codes.
Inspect waste and water
supplies for signs of damage.
Replace as necessary.
DO NOT use petroleum
based products on this
faucet.
REQUIRED TOOLS: PARTS INCLUDED:
2. Phillips Screwdriver 1. Adjustable Wrench
BEFORE YOU BEGIN YOUR INSTALLATION:
I N S T A L L A T I O N G U I D E
HK-BHC
BRIDGE KITCHEN FAUCET HANDLE CAP KIT
HK-USM1250
UNDER SINK MOUNTING HARDWARE KIT (1-1/4”)