White’s Electronics MXT 300 - Manual (Page 11)

11
4. Depth Indication - Trigger (on hand grip)
squeezed and held, the display indicates the depth
of coin sized metals. Just as in the Coin and Jewelry
mode, Depth not only tells you how deep the target
is but combined with the block reading and target
label on the right side of the display it can indicate
if the item is worth digging. A 6 - 12 Depth read-
ing and any Block indication means dig. Shallower
targets and a quarter or half size block suggests
trash. This is because the heavier more desirable
targets settle deeper into undisturbed ground. The
shallower Depth readings should have full Blocks
to warrant digging.
Chapter 4 MXT 300 Display
NOTE: Before
squeezing the
trigger, the quar-
ter Block reading
says the MXT
300 isnot sure.
A depth reading
can help
you decide to
dig or not.
A depth of
10 sug-
gests you
should dig.
In this case
a depth of
3 with only
a quarter
block fi lled
suggests
the target is
questionably
trash.
NOTE: Please refer to page 24 for the proper "X" ing
technique to "Pinpoint" the exact center of the target.