White’s Electronics MXT 300 User Manual

Page 30

Advertising
background image

30

Chapter 6 MXT 300 Searching

Prospecting MODE

1. MODE to Prospecting.

2. Trigger (on hand grip) center "primary Search-

ing" position.

3. TRAC to Ground position.

4. GAIN to "P" position.

5. Threshold, adjust for slight hum (edge of

sound).

6. DUAL CONTROL to SAT "P".

7. Pump the search coil on the ground to be

searched until ground ceases to respond.

8. Move the coil just over the ground and listen

for the distinct repeatable beep produced by a metal

target. The Prospecting Mode utilizes a VCO (Volt-

age Controlled Oscillator) audio thus the pitch of

the beep varies with the strength of the target. It is

wise to plant metals just under the soil to practice

on in order to learn to recognize what it will sound

like. Planting a metal target disturbs the ground

mineral, which usually reduces the depth it would

have been found in undisturbed ground. It will take

practice to determine the proper search speed and

technique. Do not go too fast. Try to overlap your

sweep path so that you won't miss the small and/or

deeper metal targets.

9. Once a solid repeatable VCO beep is located:

A. Consult the display VDI number and %

? Iron.

B. Squeeze and hold the Trigger on the

hand grip and "X" the area to pinpoint.

OPTIONAL method for iron.

10. Lock Trigger (on hand grip) forward.

A. Ferrous (iron) targets now sound the

same as all other metals rather than being

indicating by a grunt.

11. Ground Mineralization:

A. For Salt/Alkali environments proceed

exactly as above only with the TRAC toggle

in the Salt position.

B. For areas with an abundance of decom-

posed man made iron (which may make

the MXT 300 diffi cult to operate), proceed

exactly as above only once you pump the

loop over the ground in the Ground TRAC

setting, then set the TRAC control to Lock.

C. For highly inconsistent ground it may be

necessary to increase the Dual Control SAT

adjustment clockwise. Hyper SAT provides

threshold maintenance for the most extreme

conditions. Search coil motion becomes

increasing more critical at these higher SAT

speeds.

Chapter 6 MXT 300 Searching

Advertising