Whitehall Manufacturing F-300-S - Manual

Product photo/image above may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
F-300-S
F Series
300 Gallon
Stationary Full
Body Immersion Tank
F-300-S
Full Body Immersion Tanks
Last Update: 9/15/09
Whitehall Model F-300-S Full Body Immersion
Tank is recommended for debridement of
burn patients and others requiring carefully
controlled water temperature and/or total immer-
sion hydrotherapy.
Tank Capacity is 300 gallons.
Whirlpool Tank is 89”L x 50”W x 22”D and
is seamless welded construction, fabricated from
heavy gauge, type 304 stainless steel, polished to a
satin inish. Tank bottom is a rounded covered design
to minimize bacteria buildup with a reinforced stain-
less steel base supported by adjustable stainless
steel legs. Tank fittings are two 1-1/4” OD over-
flows, one 1-1/4” NPT filler spout, one lever oper-
ated quick open/close drain valve and an adjustable
head rest.
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.
Twin Turbine Assembly functions both as agi-
tator and emptying device. It is equipped with
Underwriters Laboratory listed 1/2 HP jet pump
motor protected with an ABS plastic shell, and
automatic thermal overload protector, and lifetime-
sealed bearings. All parts contacting the water are
stainless steel, chrome plated brass or bronze.
Thermometer is provided with a dual scale, adjust-
able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.
GUIDE SPECIFICATIONS
Provide Whitehall Stationary Full Body Immersion
Tank (specify model number and options) with a
300-gallon capacity, 89”L x 50”W x 22”D. Whirlpool
shall be fabricated from heavy gauge, type 304
stainless steel. Construction shall be seamless
welded and exposed surfaces shall be polished
to satin finish. Tank bottom shall be a seamless
rounded coved design to minimize bacteria buildup
and shall be reinforced with a stainless steel base
supported by stainless steel legs which are adjust-
able. Provide a turbine assembly with raising and
lowering device which functions both as agita-
tor and emptying device, permits adjustment of
desired height, direction of water agitation, and
can be locked into place. Turbine assembly shall
be UL listed 1/2 HP jet pump motor with auto-
matic thermal overload protector, and lifetime-
sealed bearings. Provide a thermometer with a
stem retainer to prevent rattle when whirlpool is
in operation. An adjustable head rest assembly is
also provided.
Use
Member of
U.S. Green
Building Council
Recycleable
Product